Categories: ComputerhardwareDiffenTechnologieUnterhaltungselektronik

Cat5e vs Cat6 – Difference and Comparison

Cat6-Kabel , auch als Kabel der Kategorie 6 oder Cat 6 bezeichnet , bieten ein geringeres Übersprechen, ein höheres Signal-Rausch-Verhältnis und sind für 10 GBASE -T (10-Gigabit-Ethernet) geeignet, während Cat5e- Kabel nur bis zu 1000BASE-T ( Gigabit Ethernet). Um Ihr Netzwerk zukunftssicher zu machen, ist Cat6 im Allgemeinen die bessere Wahl und die geringe Preisprämie wert. Cat5e- und Cat6-Kabel sind beide abwärtskompatibel, was bedeutet, dass neuere Cat6-Kabel mit älteren Cat5e- , Cat5- und sogar Cat3-Geräten verwendet werden können.

Contents

Vergleichstabelle

Cat5e versus Cat6 comparison chart
	Cat5e	Cat6

Cost	Varies by length and manufacturer, generally $0.20 – $0.30 per foot.	Varies by length and manufacturer, with $0.40 – $0.60 per foot as an average; generally about 20% higher than Cat5e.
Frequency	Up to 100MHz	0 – 250 MHz (minimum); 500 MHz maximum
Maximum Cable Length	100 meters	100 meters for slower network speeds (up to 1,000 Mbps) and higher network speeds over short distances. For Gigabit Ethernet, 55 meters max, with 33 meters in high crosstalk conditions.
Performance	Less crosstalk/interference than CAT5. Potentially more interference than CAT6.	SNR higher
Theoretical Top Speed	1000Mbps	10 Gbps over 33-55 meters (110-165 feet) of cable
Standard gauges in conductors	24-26 AWG wire	22-24 AWG wire
Connectors	RJ45 (aka 8P8C)	RJ45 (aka 8P8C)

Your computer uses these to talk to other computers – network Cat5e and Cat6 cables

Wiring

Both Cat5e and Cat6 are twisted pair cables that use copper wires, typically 4 twisted pairs in each cable. The specification for Cat6 features more stringent specifications for crosstalk and system noise, and provides performance of up to 250 MHz. Cat5e, in contrast, performs up to 100 MHz. This was often achieved using a spline (a longitudinal separator) in the wiring, which isolates each of the four pairs of twisted wire. However, this made Cat6 cables more rigid; newer cables use other methods to reduce noise and are more flexible. Regardless of whether a spline is used, a cable that meets Cat6 specifications provides significantly lower interference or near end crosstalk (NEXT) in the transmission. It also improves equal level far end crosstalk (ELFEXT), return loss and insertion loss compared with Cat5e. The result is less noise, fewer errors and higher data rates in the transmission of the signal.

How to identify

The category is almost always printed on ethernet cables. It is not possible to identify cable categories by color, but Cat6 cables are often thicker than Cat5e because it uses thicker copper wires. It is also not possible to identify them by looking at the plug because both Cat5e and Cat6 use the 8P8C RJ45 modular connector .

Maximum Length

Both Cat5e and Cat6 cable specifications allow lengths up to 100 meters, but Cat6e has a lower max length (55 meters) when used for 10GBASE-T (10 Gigabit Ethernet). In order to run 10GBASE-T for 100 meters, Category 6a cable, or Augmented Category 6, cables need to be used. Cat6a cables allow performance up to 500 MHz.

If network infrastructure requires covering distances larger than 100 meters, repeaters or switches are required to amplify the signal.

Speed

As mentioned previously, Cat6 cables can be used to power 10GBASE-T, or 10 Gigabit Ethernet, while the maximum that Cat5e cables can support is 1GBASE-T, or 1 Gigabit Ethernet. This is because Cat6 cables perform up to 250 MHz, more than twice that of Cat5e cables (100 MHz).

Cost

The price of ethernet cables vary by length, manufacturer and seller. In general, Cat6 cables are 10-20% more expensive compared with Cat5e cables. However, cables are generally cheap and the speed boost offered by Cat6 cables usually makes the price premium well worth it, even for home use.

What and where to buy

Most of the top 20 best selling ethernet cables on Amazon are Cat6. Cat5e cables are not popular any more and Cat6a do not seem to have caught on yet.

Is it Worth it?

There is an argument to be made that it is not worth it to invest in higher performance cables like Cat6 or Cat6a considering that the hardware on the network— modems and routers —may not be Cat6a-ready yet, i.e., if the throughput of this network equipment is the bottleneck that prevents the network from operating at the full speed afforded by Cat6.

But hardware gets upgraded over time; it is much easier to upgrade modems and routers than it is to lay in new cabling. The price difference between Cat6 and Cat5e is not that high and it is usually a good idea to spring for the better quality cable.